forgot your login?

Fuel Tank Sending Unit Gasket Replacement Kit

Part #: Z3197
Fuel tank sending unit rebuilt kit.

• Cork / Nitrile blend gasket
• 5 Hex head screws with washers and rubber gaskets
• Mounting hole pattern: SAE 5 hole

Please note that the hole pattern is not symmetrical. The original sending unit had a long float arm which needed to be oriented in a direction that kept it away from the tank sides. The asymmetrical hole pattern established this orientation because the unit could only be mounted in the one position that aligned all the holes. Even though this unit looks like it could be mounted in any orientation the holes in the tank are still asymmetrical.

So, when installing this unit check the alignment of the gasket and the sending unit to make sure they match one another and the holes in the tank.