forgot your login?

Lower Shrouds, Std Rig, Improved Retrofit, CP-22 MkI & MkII <-2012

Part #: CD7056
Lower shroud set for Capri 22 standard rig. Includes chromed bronze open body turnbuckles for ease of maintenance and positive locking with cotter pins. This shroud set is made from type 316 stainless steel wire for increased corrosion resistance.

We have discovered that the T-bar fittings (as were used at the top end of your original lower shrouds) are designed to be inserted into a stainless steel grommet in the mast. For an example of the proper attachment, refer to the method employed at the top of your forestay. The T-bar was not engineered to be used into a tang like the one used on the Capri 22 lower shroud at the spreader bracket.

Our redesigned shrouds have addressed this problem by using a custom toggle jaw fitting over the tang instead of a T-bar into the tang. No modification to your boat is required to install these new shrouds.

Warning! If you have the original T-bar fittings at the top of your lower shrouds, we highly recommend they be replaced with our new, stronger assembly.

Fits both Capri 22 MkI and MkII through hull number 1258, built in 2012, at which point a new rig manufacturer was used. The new style mast requires different length wires as well as different attachment fittings.

May we also suggest