forgot your login?

Stern Pulpit C-320 Two Piece
3rd Version

Part #: Q0061

Two piece stern pulpit for the Catalina 320. Please note that there are three styles of seats for this boat so please view and compare the related pulpit suggested below. This is the 3rd version with 4 legs on each side. Both of the earlier versions had 3 legs on each side, see Q0005 and Q9019.
• Rails are made on original welding fixture.
• Materials are T316 stainless steel.
• Tubing is 1" O.D. with a .065 wall thickness.
• Light wire exit through port outboard mount.
• Light wire is pulled through rail.
• Drilled for speaker wires.
• Lifeline mount points welded in original locations.
• Drilled for ladder latch.
• Ladder latch available if needed. See part #Z1922 suggested below
• Starboard seat material available separately upon request.
• Picture is of welding model.

1) The original welding fixture doesn't index the position of the holes in the mounting pads. Indexing available upon request for those who do not wish to fill and re-drill deck mount holes. Please see Indexing part #Z2337 suggested below.

2) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.

3) An additional packaging charge also applies to this item.

4) A 50% nonrefundable deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships.

5) This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either. So be careful and order it correctly the first time because it can't be canceled, returned, or magically changed into something different!

Technical Support