Various articles covering frequently asked questions, informative bits of information, and even a spot of humor.
Our free tech support line is manned by a small team of sailors with decades of experience.
| 10210 Systems Parkway, Suite 390 Sacramento, CA 95827 |
|
| [email protected] | |
| 1-800-959-SAIL (7245) |
Heavy duty holding tank used in the Catalina 42. Located under the pullman berth, it handles the waste for the forward head. It is 3/8" thick, twice as thick as your original 3/16" thick tank. Holding tank failure is such a disaster that you don't want anything less. 30 gallon capacity. Includes three reinforced fittings in tank (inlet, outlet, and vent). The fittings provide the female pipe thread in the tank. The male pipe thread end of a hose barb fitting is installed into the female fitting. Choose the proper size and type of hose barb fittings from those shown below.
You must verify the dimensions of the tank are suitable for your use and supply location and dimensions of the female fittings. It is always possible the tank size changed during production but the change was not recorded.
This custom product will be made to your dimensions. Click on the Measurement Drawing in the "Technical Support" area below. Print the required drawing then email or fax the completed and signed drawing back to us.
Note that the perspective drawing in the top right hand corner of the drawing above needs to be rotated 90 degrees clockwise along the long axis for the tank to appear as it does in the boat. The notch shown on the left side of the tank in the perspective view is for the tank inlet and vent, which when the tank is rotated ends up on the top of the tank.
1) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.
2) A 50% nonrefundable deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships.
3) This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either. So be careful and order it correctly the first time because it can't be canceled, returned, or magically changed into something different!
Heavy duty holding tank used in the Catalina 42. Located under the pullman berth, it handles the waste for the forward head. It is 3/8" thick, twice as thick as your original 3/16" thick tank. Holding tank failure is such a disaster that you don't want anything less. 30 gallon capacity. Includes three reinforced fittings in tank (inlet, outlet, and vent). The fittings provide the female pipe thread in the tank. The male pipe thread end of a hose barb fitting is installed into the female fitting. Choose the proper size and type of hose barb fittings from those shown below.
You must verify the dimensions of the tank are suitable for your use and supply location and dimensions of the female fittings. It is always possible the tank size changed during production but the change was not recorded.
This custom product will be made to your dimensions. Click on the Measurement Drawing in the "Technical Support" area below. Print the required drawing then email or fax the completed and signed drawing back to us.
Note that the perspective drawing in the top right hand corner of the drawing above needs to be rotated 90 degrees clockwise along the long axis for the tank to appear as it does in the boat. The notch shown on the left side of the tank in the perspective view is for the tank inlet and vent, which when the tank is rotated ends up on the top of the tank.
1) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.
2) A 50% nonrefundable deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships.
3) This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either. So be careful and order it correctly the first time because it can't be canceled, returned, or magically changed into something different!
Catalina Direct is the largest supplier of Catalina Yacht parts in the country. We specialize in parts, custom up-grades, and accessories. Worldwide delivery available.
