In order to save money, we recommend re-using your old halyard shackle and securing it to the halyard with a bowline knot, just as the factory did. If you need new shackles, see the related items below.

• Diameter: 1/4"
• Length: 15' & 13' (jib) and 42' (main)
• Construction: Double braid continuous strand line without mill splices (see "Technical Support" below for the full story)
• Fiber: Polyester cover, w/ Dyneema core
• Stretch: Extremely low, approximately 1/4 that of polyester
• Color: White with red markers (jib) and white with blue markers (main)

This halyard set is designed to replace the factory supplied halyards for the boat with a required block with becket as part of the jib halyard to create the 3 to 1 purchasing for tensioning the jib luff. Note that the lengths provided, 15' and 13', are enough to get the sail up and then adjust tension without much excess line. Some owners have gone with a single longer jib halyard, but this was not the standard configuration.